Honda 2010 Ridgeline Owner's Manual page 493

10/01/26 19:47:45 31SZA620_492
SOCKET
5. Determine which of the four bulbs
is burned out: stop/taillight,
back-up light, side marker light, or
turn signal light.
6. Remove the socket by turning it
one-quarter turn counterclockwise.
7. Pull the bulb straight out of its
socket.
8. Push the new bulb straight into
the socket until it bottoms.
TABS
9. Turn on the lights to make sure
the new bulb is working.
BULB
10. Put the socket back into the light
assembly, and turn it clockwise to
lock it in place.
11. Align the two tabs on the light
assembly with the mounting holes
and install the rear light assembly
in the rear pillar. Tighten the two
bolts securely.
Lights
Side Turn Signal Lights
On Touring models
Each outside mirror has side turn
signal lights. The lights should be
replaced by your dealer.
487