Honda 2010 Ridgeline Owner's Manual page 147

10/01/26 18:47:09 31SZA620_146
To program the Drive Lock mode:
Locks all doors and tailgate when the
vehicle's speed reaches about 9 mph
(15 km/h).
1. Make sure the shift lever is in the
Park (P) position.
2. Turn the ignition switch to the ON
(II) position, and make sure to
close the driver's door.
3. Push and hold the brake pedal,
and move the shift lever out of the
Park (P) position.
Push and hold the front of the
4.
master door lock switch on the
driver's door. You will hear a click.
Keep holding the switch until you
hear another click (after about 5
seconds).
5. Release the switch and, within 5
seconds, turn the ignition switch
to the ACCESSORY (I) position.
Move the shift lever to the Park
(P) position.
6. Turn the ignition switch to the
LOCK (0) position.
Door Locks
Auto Door Unlocking
On vehicles without navigation system
The auto door unlocking feature has
five possible settings:
The auto door unlocking is
deactivated all the time.
The driver's door unlocks when
you move the shift lever to the
Park (P) position with the brake
pedal depressed.
This is the default setting.
All doors and tailgate unlock when
you move the shift lever to the
Park (P) position with the brake
pedal depressed.
The driver's door unlocks
whenever you turn the ignition
switch to the ACCESSORY (I)
position.
All doors and tailgate unlock
whenever you turn the ignition
switch to the ACCESSORY (I)
position.
CONTINUED
141