Honda 2010 Ridgeline Owner's Manual page 149

10/01/26 18:47:37 31SZA620_148
3. Push and hold the rear of the
master door lock switch on the
driver's door. You will hear a click.
Continue to hold down the switch:
Until you hear another click
(after about 5 seconds) to
activate
driver's door unlock
feature.
Or, until you hear two more
clicks (after about 10 seconds)
to activate all doors and tailgate
.
unlock feature
4. Release the switch, and within 5
seconds, turn the ignition switch
to the LOCK (0) position.
To program the Ignition Switch
Unlock mode:
Unlocks the driver's door or all doors
and tailgate when the ignition switch is
moved out of the ON (II) position.
1. Make sure the shift lever is in the
Park (P) position.
2. Turn the ignition switch to the ON
(II) position, and make sure to
close the driver's door.
Door Locks
3. Push and hold the brake pedal,
and move the shift lever out of P.
4. Push and hold the rear of the
master door lock switch on the
driver's door. You will hear a click.
Continue to hold the switch:
Until you hear another click
(after about 5 seconds) to
activate the driver's door unlock
feature.
Or, until you hear two more
clicks (after about 10 seconds)
to activate all doors and tailgate
unlock feature.
5. Release the switch and, within 5
seconds, turn the ignition switch
to the ACCESSORY (I) position.
Move the shift lever to the Park
(P) position.
6. Turn the ignition switch to the
LOCK (0) position.
CONTINUED
143