Changing A Light Bulb - Baumatic Spectrum User Manual

Changing a light bulb

IMPORTANT: BEFORE ATTEMPTIN
LIGHT BULB, YO
DISCONNECTED THE COOKER HOOD FROM YOUR
MAINS SUPPLY.
o Prior to touching the light bulbs ensure they are coo
o First unscrew the 4 screws securing the glass panel on the side
of the appliance where you a
o Disconnect the light wiring connection point and push/pull the
light out of the light fitting.
o IMPORTANT:
it will be necessary to obtain the bulbs, bulb holders and wiring
as a complete
Department.
o Fit the replacement bulbs, bulb holders and
manner as the originals.
o Reconnect the light wiring connection point.
o IMPORTANT: Defective bulbs should be replaced immediately.
o If the light or lights still do not work, make sure that the lamps
are fitted properly into their
technical assistance.
o Refit the glass to the appliance.
U MUST ENSURE THAT YOU HAVE
re changing the bulb.
It is not possible to replace the bulbs individually,
part. This is
G TO CHANGE A
available from
wiring in the same
housings before you call for
led down.
our Spares
13