Appendix C How To Set/Check Application Server (Windows) (Iscsi); Initializing Application Server - NEC Storage M100 Series User Manual

Appendix C How to Set/Check Application Server
C.1 Initializing Application Server
Perform the following steps to initialize the application server in Windows environments.
Release 6.0
(Windows) (iSCSI)
Prepare for installation.
For details, refer to
Install Microsoft iSCSI Software Initiator.
For details, refer to
Software Initiator.
If Microsoft iSCSI Software Initiator has already
been installed, this step is not necessary.
Install PathManager.
For details, refer to
Storage PathManager.
When PathManager will not be used, this step is not
necessary.
This describes how to set up Microsoft iSCSI
Software Initiator.
For details, refer to
Software Initiator.
319
Section C.1.1: Preparation.
Section C.1.2: Installing iSCSI
Section C.1.3: Installing NEC
Section C.1.4: Setting up iSCSI