NEC Storage M100 Series User Manual page 107

User Guide
c. Create a symbolic link to JRE in the plugins directory of Firefox.
Run the following command with the /usr/lib/firefox-<version>/plugins (for the
default settings) as a current directory.
ln -s /usr/java/jre<version>/plugin/i386/ns7/libjavaplugin_oji.so (for
Firefox 3.5 or earlier)
ln -s /usr/java/jre<version>/lib/i386/libnpjp2.so (for Firefox 3.6 or later)
Release 6.0
 The disk array must be connected to the NEC Storage Manager Client
machine over a LAN to execute Network Setting Tool.
 Note the following when you connect a disk array for which the network
settings have not been configured.
The IP addresses, BMC addresses and a floating address of the disk

array are 0.0.0.0 by default.
Connect the disk array to physically the same network where the NEC

Storage Manager Client machine belongs (i.e. the network not beyond
a router).
User Datagram Protocol (UDP) and port number "2730" are used for

searching disk arrays. If any firewall is set, configure the settings of the
network for the NEC Storage Manager Client machine and the disk
array to allow packets for search to pass.
107
Chapter 4 NEC Storage Manager