Table of Contents
Advertisement
setup screen
6. Specify the <Mask Zone Setup>.
You can specify a specific zone where a defined operation will be performed if an
object under auto tracking enters the zone.
• [
] : Start your settings.
• [
] : Specify the start and end points.
• [
] : You can exit the mode.
7. Specify the activation time and activation condition.
For more information about <Activation time> and <Action>, refer to "Alarm input". (page 88)
8. When done, click [Apply (
M
The Trace Zone Setup menu is available only with SNP-3371TH.
Time schedule
You can configure so that an event will occur at a scheduled time regardless of the actual
occurrence of the event.
1. From the Setup menu, select the
<Event (
2. Click <Time schedule>.
To set the timer event
1. Set <Timer event setup> to <Enable>.
2. Specify the <Activation time>.
• Always : Always activates in operated
mode at the set interval.
• Only scheduled time : Periodically
activates in operated mode at a
specified time and date.
3. Specify the <Transfer interval>.
4. Specify the activation conditions.
• FTP sending : Specify the use of the FTP transfer if an event occurs.
• Record : Specify the use of recording if an event occurs.
5. When done, click [Apply (
94_ setup screen
)> tab.
)].
)].
Advertisement
Table of Contents
