Table of Contents
Advertisement
DIP SWITCH SETTING (SNP-3302H/3371H/3371TH)
How to set up Protocols and ID DIP Switches
You can control various settings of the camera system using the Communication and ID
DIP switches. Before installing the product, please set up the DIP switches according to the
installation environment.
1. Set the switches according to your installation environment. For more detailed setup
information, please refer to the chart on the next page.
2. The camera may malfunction if the switches are not fully turned On/Off; please
double check the switches before finishing setup.
Communication Protocol
DIP Switch (SW2)
Communication Protocol DIP Switch Settings (SW2)
ON
Camera ID DIP Switch (SW1)
SW2
ON
OFF
English _19
Advertisement
Table of Contents
