Table of Contents
Advertisement
PT limit
You can specify restrictions on the pan or tilt function.
1. From the Setup menu, select the
<Audio & Video (
2. Click <PT limit>.
3. Decide if you want to limit the PT
operations. If so, specify the details.
• Pan / Tilt Limit : Select a mode to set
between Pan limit and Tilt limit.
- Use : Select whether to use limit in
set mode.
- [
] : Start limit setting.
- [
] : Provide the start and end points.
- [
] : If you want to change the point setting, click this to return to the
input dialog.
Camera setup
You can change the camera settings according to the environment where the camera is
located.
1. From the Setup menu, select the
<Audio & Video (
2. Click <Camera setup>.
3. Configure the settings as necessary
of : SSDR, White balance, Backlight,
Exposure, Special, Focus, OSD, Time
OSD
4. When done, click [Apply (
If a certain time (timeout: 240s) is elapsed
with your not pressing the [Apply (
button after changing the settings, your changes
will not be applied.
)> tab.
)> tab.
)].
)]
English _73
Advertisement
Table of Contents
