Table of Contents
Advertisement
Tracking setup
You can configure the tracking settings.
1. From the Setup menu, select the
<Event (
)> tab.
2. Click <Tracking setup>.
3. Specify the <Tracking setup>.
• Auto Track : Specify the use of auto
tracking.
• Camera Height : Specify the height
from the ground to the camera
installation position.
• Object size : Specify the size of the
object to track.
• Sensitivity : Specify the sensitivity
level according to the change of the
illumination if an object is detected.
• Zoom control : Select a zooming
operation that you want to apply for
tracking the object.
• Lost mode : If Auto Track fails,
specify the operation to perform for
the rest of time specified in Auto
Release.
• Auto return : This will hold the
camera for the rest of the specified
time after the Auto Release operation and return it to the default position.
• Auto Release : Specify the tracking time for a detected object.
• Indicator : Set the indicators surrounding the object.
4. Specify the <Target lock setup>.
You can specify the target manually and perform the auto tracking.
• [
] : The selected mode will be applied.
• [
] : Activate the target lock operation.
5. Specify the <Display Tracking Mask Area>.
Specify the display of the tracking mask on the screen, which was created in Mask
Zone Setup.
• [
] : The selected mode will be applied.
English _93
Advertisement
Table of Contents
