Advertisement
ADDITIONAL SAFETY RULES
FOR CHARGER & BATTERY CARTRIDGE
1. Do
not charge Battery Cartridge when temperature is BELOW 10°C (5OOF)
or ABOVE 4OoC (104OF).
2. Do not attempt t o use a step-up transformer, an engine generator or DC power
3.
Do not allow anything t o cover or clog the charger vents.
4. Always cover the battery terminals with the battery cover when the battery
5. A battery short can cause a large current flow, overheating, possible burns
receptacle.
cartridge is not used.
and even a breakdown.
(1
1
Do not touch the terminals with any conductive material.
(2)
Avoid storing battery cartridge in a container with other metal objects such
(3)
Do not expose battery cartridge t o water or rain.
ture may reach or exceed 5OoC (122OF).
completely worn out. The battery cartridge can explode in a fire.
as nails, coins, etc.
6. Do not store the tool and Battery Cartridge in locations where the tempera-
7. Do
not incinerate the Battery Cartridge even if
it
is severely damaged or is
ADDITIONAL SAFETY RULES
1. Use only Makita genuine driver bits and drywall screw strips specified for this
2. Always be sure that the tool is switched off and unplugged before carrying
3.
Hold the tool firmly and squarely against the workpiece.
4. Be sure no one is below when using the tool in high locations.
5. Do not touch any metal parts of the tool t o prevent electrical shock if you
6. Never lubricate the moving parts such as the feeder box. Malfunction of the
tool.
out any work on the tool.
drive into a "live" wire.
tool may result.
SAVE THESE INSTRUCTIONS.
6
Advertisement
