Makita EW120R Instructions For Use Manual page 24

3. STOPPING
(a) Set the speed control lever at the
low speed position and allow the
engine to run at low speed for 2 or 3
minutes before stopping. (EW120R)
Set the speed control lever at the
low speed position and allow the
engine to run at low speed for 1 or 2
minutes before stopping.
(EW220R,EW320TR)
(b) Turn the STOP SWITCH to the
position "O" (OFF).
Do not stop the engine suddenly
■
when it is running at high speed.
(c) Close the fuel cock.
(EW220R,EW320TR)
Speed control lever
" I " (ON)
" O " (OFF)
− 13−
Speed control lever
L
H
" I " (ON)
ON
OFF
" O " (OFF)
CLOSE
OPEN