Related Manuals for Makita BST220
Summary of Contents for Makita BST220
- Page 1 INSTRUCTION MANUAL Cordless Stapler BST220 BST221 009146 IMPORTANT: Read Before Using.
-
Page 2: Specifications
) : 93 dB(A) manufacturer declare that the following Makita Uncertainty (K) : 3 dB(A) machine(s): Designation of Machine: Wear ear protection Cordless Stapler Model No./ Type: BST220,BST221 are of series production and Conforms to the following European Directives: 2006/42/EC... -
Page 3: General Power Tool Safety Warnings
And are manufactured in accordance with the following Do not expose power tools to rain or wet standards or standardised documents: conditions. Water entering a power tool will EN60745 increase the risk of electric shock. The technical documentation is kept by our authorised Do not abuse the cord. - Page 4 rate for which it was designed. tool is maintained. 18. Do not use the power tool if the switch does 29. Follow instruction lubricating not turn it on and off. Any power tool that cannot changing accessories. be controlled with the switch is dangerous and 30.
- Page 5 14. Do not tamper with the tool or attempt to use it Do not expose battery cartridge to water for other than driving fasteners. or rain. 15. Do not operate the tool without fasteners. It A battery short can cause a large current flow, shortens the service life of the tool.
-
Page 6: Functional Description
NOTE: FUNCTIONAL DESCRIPTION There is a possibility that the tool may operate for • an instant when only the trigger is pulled. This does CAUTION: not indicate a problem. If this occurs, point the tool Always be sure that the tool is switched off and the •... -
Page 7: Operation
Hook 1. Staples 2. Main magazine CAUTION: Always make sure that your fingers are not placed • on the trigger or the lever and the battery cartridge is removed before using the hook. 1. Groove 2. Hook 3. Screw 009153 To secure the sub magazine in place, hook the locking lever on the rear of the sub-magazine. -
Page 8: Maintenance
(1/4 turn) so that the groove on the nut runs parallel to the sight window to check if there are staples in the magazine. magazine. When staples are not visible through the window, load staples into the magazine. Driving staples Removing jammed staples 1. - Page 9 NOTE: Some items in the list may be included in the tool • package as standard accessories. They may differ from country to country.
- Page 12 Makita Corporation Anjo, Aichi, Japan www.makita.com 884841D226...