Advertisement
Installing
or
removing battery cartridge
NOTE :
Before operation, charge the battery cartridge with Makita
9 . 6 V Fast
charger.
To insert the battery cartridge, pull
out the set plate, align the tongue
on the battery cartridge with the
groove in the flashlight handle and
slip i t into place. Snap the set plate
back into place. Be sure to close the
set plate fully before using the flash-
light.
Switch action
To turn the flashlight on, press the
"ON" side of the switch.
Press the
"OFF"
side to turn it off.
Condensina or disDersina liaht
-
- -
To
cast a wide beam, turn the knob
so that the pointer points to the
For a narrow spotlight beam, turn
the knob so that the pointer points
to the
= w
marking.
marking.
Stand
The stand allows the flashlight to
be positioned a t
a
convenient up-
ward angle.
2
Advertisement
