Advertisement
AIR COMPRESSOR AND CONNECTIONS
NOTE：The air pressure required depends on fastener size and type of material to be nailer. Never exceed the
air pressure recommended by specifications.
If nails do not drive down tightly, adjust to a higher pressure setting until satisfactory. Reduce air pressure if
the fasteners are being driven too deeply.
Adding Quick Connector on the nailer and Quick coupler on the air hose can improve performance.
WARNING OF DRIVING NAILS
During the process of assembling the AIR HOSE, do not put your finger into the TRIGGER.
l It could cause the risk with an unexpected firing
Please get the DRIVER GUIDE tight on woods and then driving the TRIGGER.
l The nails can be driven with the driving the TRIGGER
OPERATING THE NAILER
Add a few drops of high speed spindle oil or air tool oil into the air inlet.
Check the operation of the trigger, and load nails into the magazine.
Connect the nailer to the air compressor.
Test the depth of nails by driving nails into a sample piece of wood. If the nails do not reach the desired
depth, adjust the air pressure.
4
Advertisement
