Makita LSSOODWA Instruction Manual page 20

5. Cutting crown and cover moldings
*Crown and cove moldings can be cut on
a
compound miter saw with the moldings
laid flat on the turn base.
*There are two common types of crown moldings and one type of cove moldings;
52/38" wall angle crown molding, 45" wall angle crown molding and 45" wall angle
cove molding. See illustrations below.
Ceiling Ceiling Ceiling
52/38' type 45" type
45" type
crown molding crown molding cove molding
*There are crown and cove molding joints which are made to fit "Inside" 90" corners
( 0
and
0)
in Fig. C ) and "Outside" 90" corners
( 0
and
@
in Fig. C).
- -
Inside corner Outside corner
I
Fig. (C)
Inside corner
Outside corner
20