Switch Action - Makita JR3020 Instruction Manual

1. Lock button
2. Switch trigger
1. Speed change knob
2. Pointer
ASSEMBLY

Switch action

002494
1
CAUTION:
• Before plugging in the tool, always check to see that the
2
switch trigger actuates properly and returns to the "OFF"
position when released.
• Switch can be locked in "ON" position for ease of
operator comfort during extended use. Apply caution
when locking tool in "ON" position and maintain firm
grasp on tool.
To start the tool, simply pull the switch trigger. Tool speed is
increased by increasing pressure on the switch trigger.
Release the switch trigger to stop.
Tool speed can be adjusted by turning the speed change
002495
knob. When the portion with
to the pointer, faster speed can be obtained by turning the
knob clockwise. When the portion with
1
adjacent to the pointer, full speed can be obtained.
2
Continuous operation can be performed only when the knob
is set to the full speed position. To perform continuous opera-
tion, pull the switch trigger fully and then push the lock button
up. To stop the tool from the locked position, pull the switch
trigger fully, then release it.
002496
CAUTION:
• Always be sure that the tool is switched off and
unplugged before carrying out any work on the tool.
mark is positioned adjacent
mark is positioned
7