System Startup - Honda iST Owner's Manual

System Startup

1
Neutral Position
Control handles must be in the neutral position prior
to starting the control system.
Neutral control handle position; handles at vertical.
2
Turn System On
Turn on the system with the ignition keyswitch or
enable switch. Do not move the handles for five
seconds while the system runs diagnostics during
start-up.
This procedure explains the process of starting up the iST system.
3
Check System Lights
The system is on when the
neutral indicator lights and
SEL
lights are fully illuminated.
If the light blinks slowly,
SEL
the control handles are not in
neutral. Move the handles to
neutral and the system will start.
If all keypad lights blink simul-
taneously, system is in alarm
mode. Shutdown system and
proceed to Alarm Code Retrieval
(page 15) before restarting.
MULTI–ENGINE CONTROL
NEUTRAL NEUTRAL
WARM
SLOW
NEUTRAL NEUTRAL
WARM
SLOW
NEUTRAL NEUTRAL
WARM
SLOW
SINGLE ENGINE CONTROL
NEUTRAL
WARM
SLOW
NEUTRAL
WARM
SLOW
NEUTRAL
WARM
SLOW
4