Station Transfer - Honda iST Owner's Manual

Station Transfer

1
Determine Active Station
If the SEL light is fully illuminated (not blinking), station
is "active" and in control of engine's gear and throttle
(neutral lights will only be on if gear is in neutral position).
MULTI-ENGINE
NEUTRAL
SLOW
SINGLE ENGINE
This procedure allows the propulsion system to be transferred from one helm control station
to the other.
2
Determine Inactive Station
Prior to pressing the SEL button at the station where
you wish to take control, the SEL light & appropriate
gear light will blink once every 2 seconds (inactive
station heartbeat).
light and appropriate gear lights will flash one time
SEL
every two seconds.
WARM
NEUTRAL
NEUTRAL NEUTRAL
WARM
SLOW
WARM
SLOW
3
Begin station transfer at the
helm station where you wish to
take control
Press and release SEL button one time, at the
helm station where you want to take control (the
SEL light will begin to flash).
NEUTRAL
The light and appropriate gear lights will flash when
SEL
button is pressed at the inactive station.
SEL
NEUTRAL
SLOW
11
NEUTRAL
WARM
SLOW
WARM