Basic Configuration; Configuring Your Browser For Ap-7131N-Fgr Support - Motorola AP-7131N-FGR Installation Manual

26 Motorola Solutions AP-7131N-FGR Access Point Installation Guide
3

Basic Configuration

3.1 Configuring Your Browser for AP-7131N-FGR Support

An AP-7131N-FGR model access point is compliant with the FIPS140-2 standard. The AP-7131N-FGR
is only accessible using browsers that support the TLS 1.0 protocol. The AP-7131N-FGR is not
accessible by browsers supporting the SSL 2.0 or SSL 3.0 protocols. Additionally, ensure JRE (version
1.6) is installed on the computer accessing the AP-7131N-FGR GUI applet. The following sections
describe how to change your browser settings using either Internet Explorer or Mozilla Firefox in order
to correctly launch and display the AP-7131N-FGR GUI applet. Without these browser modifications,
you will not be able to access the AP-7131N-FGR GUI applet.
CAUTION With both the Internet Explorer and Mozilla Firefox browser
3.1.1 Accessing the AP-7131N-FGR Using Internet Explorer
To define the browser settings needed to access the AP-7131N-FGR using Windows Internet Explorer:
1. Open the Internet Explorer browser and open the
2. Select the
3. Scroll down to the bottom of the Advanced tab and ensure the
selected. Remember, the AP-7131N-FGR does not support SSL 2.0 or SSL 3.0.
4. Enter the IP address of the AP-7131N-FGR 4.0 within Internet Explorer. Select the
to this Website (not recommended)
10.1.1.1.
At this point in the browser configuration, a screen displays stating the Web site's certificate
cannot be verified.
5. Click Yes
6. Log in using
default login is successful, the
immediately change the password for security. For more information, see Configuring the
Access Point on page 27.
configurations, screens may display stating Website certificates
cannot be validated or have been certified by an unknown
authority. Do not exit the browser configuration, as these
messages will occur with only the initial AP-7131N-FGR browser
configuration.
Advanced tab.
to continue. The access point's login screen displays.
admin as the default User ID and
Change Admin Password
Tools > Internet Options
option. The default WAN port static IP address is
motorola as the default password. If the
window displays. You need to
menu.
Use TLS 1.0 option is
Continue