Table of Contents
Advertisement
FUNCTIONAL
DESCRIPTION
1. Lever
1
1. Clamping screw
B
A
1
1. Top guide
2. Base
1. Lock -off button
2. Switch trigger
6
CAUTION:
•
Always be sure that the tool is switched off and unplugged before
adjusting or checking function on the tool.
Adjusting depth of cut
005448
CAUTION:
•
After adjusting the depth of cut, always tighten the lever securely.
Loosen the lever on the depth guide and move the base up or down. At the
desired depth of cut, secure the base by tightening the lever.
1
Bevel cutting
005422
Loosen the clamping screws in front and back, and tilt the tool to the desired
angle for bevel cuts (0° - 45°). Secure the clamping screws tightly in front and
1
back after making the adjustment.
Sighting
005395
For straight cuts, align the A position on the front of the base with your cutting
line. For 45° bevel cuts, align the B position with it.
2
Switch action
005398
1
CAUTION:
•
Before plugging in the tool, always check to see that the switch trigger
2
actuates properly and returns to the "OFF" position when released.
To prevent the switch trigger from being accidentally pulled, a lock-off button is
provided. To start the tool, push in the lock-off button and pull the switch trig-
ger. Release the switch trigger to stop.
Advertisement
Table of Contents
