Figure 7- 51 Abnormity Setup Menu - Honeywell CADVR-04D User Manual

Parameter Function
Event The abnormal events include: no disk, no space, disk error, net error.
Type
You need to draw a circle to enable this function.
Normal The corresponding alarm activation output channel when alarm occurs,
Out There are six channels.
Latch The alarm output can delay for the specified time after alarm stops.
Then system disables alarm and corresponding activation output.
The value ranges from 10s to 300s.
Send If you enable this function, system can send out email to alarm the
email specified user.
Alarm System can upload the alarm signal to the network (includes the alarm
upload centre.)
Show System pops up the alarm messages in the monitor interface.
message
Buzzer Once you check the box here, the buzzer beeps when an alarm
occurred.
Video Matrix

Figure 7- 51 Abnormity Setup Menu

Please refer to the following sheet for detailed information.
182