D-Link DCS-6220G User Manual page 62

DCS-660G User's Manual
Configuration > Tools > Default
Click Apply
changes effective
Click on the Default button to access the factory setting restoration and camera calibration options
from the Tools menu.
Click Default
Click Apply on the screen to restore factory default settings. This means any changes made will be lost
and the system will be reset to the initial status when shipped from the factory. After confirmation, the
system will restart and require the Installation Wizard software program to locate the IP address of the
DCS-6620G.
Click Apply under Calibrate to restore them camera's factory lens position. This means that the camera
will be recalibrated to the default center to position to recover from any external forces that may have
affected it.
D-Link Systems, Inc.
to make
Using the DCS-660G with an Internet Browser
6