D-Link DCS-6620 Install Manual
D-Link DCS-6620 Install Manual

D-Link DCS-6620 Install Manual

Ptz internet camera
Hide thumbs Also See for DCS-6620:

Advertisement

Advertisement

Table of Contents
loading

Summary of Contents for D-Link DCS-6620

  • Page 2 System Requirements DCS-6620 Install Guide D-Link Systems, Inc.
  • Page 3 DCS-6620 Install Guide Hardware Overview Motorized Zoom Lens Built-In Microphone Link LED Power LED D-Link Systems, Inc.
  • Page 4: Hardware Overview

    Hardware Overview Rear Connect the power adapter jack to the PTZ Internet Camera before plugging in to a power socket. This will reduce the risk of accidental electric shock. DCS-6620 Install Guide External I/O Port External Mic. Ethernet 10/100 RJ45 socket...
  • Page 5: Hardware Installation

    Connect the Ethernet Cable Connect one end of the Ethernet cable to the network cable connector located on the back panel of the DCS-6620, and attach the other end to a router, switch, or gateway on the network. If you connect this camera directly to a PC, you will need a cross-over Ethernet cable.
  • Page 6 DCS-6620 Install Guide Attach the A/V cable to the A/V out connector if you wish to connect the DCS-6620 to your TV set. Attach the yellow RCA connector to the “video” connector on your TV. Attach the white RCA connector to the “audio”...
  • Page 7: Installation Wizard

    DCS-6620 Install Guide Insert the DCS-6200 CD into the CD-ROM drive. Click on Install Software. Click on Install Wizard. Click Next D-Link Systems, Inc. Installation Wizard...
  • Page 8 Installation Wizard (continued) DCS-6620 Install Guide Click Next Click Next Click Finish D-Link Systems, Inc.
  • Page 9: Camera Configuration

    The software will search for cameras. The Installation Wizard will now show a MAC address of the DCS-6620 and an IP Address (which may or may not be correct depending on what you have your DCS-6620 connected to).
  • Page 10 Let go when the red LED starts to flash the second time. Once the camera appears, select the camera by placing a Checkmark in the box. DCS-6620 Install Guide Click Search to refresh the list of cameras if needed. D-Link Systems, Inc.
  • Page 11 DCS-6620 Install Guide Click the Setup button. Enter an administrative password in the Admin password and Confirm password fields. Click the Next button. For details on the Date/Time Settings, please refer to the User Manual on the CD-ROM. D-Link Systems, Inc.
  • Page 12 Uncheck the box labeled Reset IP address at the next boot. Click the Next button. If you need to modify the IP settings, please refer to the user manual on the CD-ROM. Click the Apply button. DCS-6620 Install Guide D-Link Systems, Inc.
  • Page 13 DCS-6620 Install Guide After the settings have been saved, the Done button will appear. Click the Done button. Click the button labeled Link to Selected Device(s). D-Link Systems, Inc. Camera Configuration (continued)
  • Page 14 After you click the button labeled Link to Devices(s), the Installation Wizard will automatically open your Internet browser to the IP Address of the DCS-6620, in this example it is: http://192.168.0.146.Your DSC-6620 may have a different IP Address. The installation and configuration of the DCS-6620 PTZ Internet Camera is now complete.
  • Page 15 DCS-6620 Install Guide Notes D-Link Systems, Inc.

Table of Contents