The 3-Port Printserver's Ports; Chapter 3: Getting To Know The Etherfast 1-Port Printserver; The 1-Port Printserver's Leds - Linksys Instant EtherFast EPSX3 User Manual

The 3-Port PrintServer's Ports

Power Port
This port on the back of your unit connects your
Switch's power adapter.
Printer 1, Printer 2,
These three parallel (LPT) ports connect to your
Printer 3 printers.
LAN Port
This Ethernet RJ-45 port connects to your network
device, such as a PC, other print server, remote hard
drive, and any other networkable device. Use UTP
Category 5 or better cabling with this port.
Reset Button Briefly pressing the Reset Button will refresh the
PrintServer's connections, potentially clearing any
jammed links. Holding in the Reset button will gen-
erate a diagnostic print-out.
Reset Button
This button has two functions: to restore the factory default settings and
to print a diagnostic test page containing all current settings.
To reset the factory default settings:
1. Turn the PrintServer OFF.
2. Press and hold the Reset button. While pressing the button, switch the Print
Server ON.
3. If you continue pressing the button for 10 seconds, a diagnostic page will
be printed, showing the new (default) settings.
To generate a diagnostic test printout:
1. Ensure that the PrintServer and the attached Printer are ON.
2. Press the Reset button and hold it in for 2 seconds.
3. The diagnostic test page, containing the current settings, will be printed,
unless you have a PostScript printer. PostScript printers are unable to print
this page.
4
Instant EtherFast
Figure 2-2
Series EtherFast 10/100 PrintServers
®
Chapter 3: Getting to Know the
EtherFast

The 1-Port PrintServer's LEDs

Power
Act
LAN
Error
®
1-Port PrintServer
Figure 3-1
Green. The Power LED illuminates when the PrintServer is
powered on.
Green. If the Act LED is continuously illuminated, the
PrintServer is actively sending or receiving data.
Green. The LAN LED illuminates to indicate that the
PrintServer is successfully connected to a device through the
LAN port.
Red. The Error LED lights up when there is a problem print-
ing to the indicated printer.
5