Setting Fence Stops; Setting 45° Inward Fence Stop; Setting 90° Fence Stop; Setting 45° Outward Fence Stop - Grizzly G0490 Owner's Manual

Setting Fence Stops

The fence stops simplify the task of adjusting the
fence to 45˚ inward, 90˚, and 45˚ outward (135˚).
Tools Needed
45° Square ........................................................ 1
90° Square ........................................................ 1
Sliding Bevel ...................................................... 1
Wrench 10mm ................................................... 1
Hex Wrench 4mm .............................................. 1
Setting 45° Inward Fence Stop
1.
DISCONNECT JOINTER FROM POWER!
2.
Tilt fence approximately 45° inward onto stop
bolt, as shown in Figure 63, then place 45°
square against fence and table.
Figure 63. Fence adjusted 45˚ inward.
3.
Loosen jam nut on 45° inward stop bolt
shown in Figure 64.
45° Inward Positive
Stop Bolt
Figure 64. 45° inward positive stop bolt.
4. Adjust stop bolt until fence is exactly 45°
inward while resting on bolt (verify angle with
a 45° square), then retighten jam nut loos-
ened in Step 3.
Model G0490/G0490X (Mfd. Since 8/12)
Setting 90° Fence Stop
1.
DISCONNECT JOINTER FROM POWER!
2.
Loosen set screw in plunger lock collar shown
in Figure 65, and loosen fence tilt lock.
Qty
Plunger
Lock
Collar
Figure 65. Adjusting fence to 90˚.
3. Using a 90° square, adjust fence to 90° posi-
tion, as shown in Figure 65, then tighten set
screw in plunger lock collar.
4.
Adjust indicator (if necessary) to 0° to cali-
brate fence tilt scale.
Setting 45° Outward Fence Stop
1. DISCONNECT JOINTER FROM POWER!
2. Loosen fence tilt lock, and position fence
against 45° outward stop bolt.
3. Loosen jam nut on 45˚ outward fence stop
bolt shown in Figure 66.
Figure 66. Adjusting fence 45˚ outward.
4.
Adjust 45˚ outward stop bolt until fence is
exactly 45° outward while resting on bolt
(check the angle with a sliding bevel set to
135°), then retighten jam nut loosened in
Step 3.
Fence Tilt
Scale
45° Outward
Positive Stop
Bolt
-45-