Table of Contents
Advertisement
6. If you want to assign access passwords, type the passwords into the
Password boxes.
7. When you're done, click on the Apply button, followed by OK. Repeat
steps 1-7 for any drive or folder you desire to share on the network.
You have successfully enabled File Sharing on your PC. Your selected
drives can now be accessed by other network users. If a user tries to
access one of your password-protected drives or folders, he or she will be
asked for the appropriate Read-Only or Full-Access password. Continue
on if you wish to share your PC's printer over the network.
Enabling Printer Sharing
1. On your Desktop, double-click on the My Computer icon.
2. Double-click the Printers folder. A window of available printers will
appear.
3. Using your right mouse button, click once on the printer that you want to
share with other users. Click on Sharing, followed by the Sharing tab.
4. Click on Share As. In the Share Name box, give a
name to the printer you want to share. If you want
to assign a password to the printer so that only cer-
tain users can access it, type a password in the
Password box.
5. Click on the Apply button, followed by OK. Your
printer(s) are now shared.
The Printer Sharing setup and installation is complete. Your printer can
now be accessed by other network users. The printer's driver may have to
be installed on other PCs. Consult your printer's documentation.
38
Linksys Instant EtherFast
Series
®
N N o o t t e e : : Not all printers
may be shared on the
network. Others may
require special instruc-
tions. Refer to your
printer's user guide or
contact your printer
manufacturer if you
think this may be the
case with your printer.
EtherFast
10/100 CardBus PC Cards
®
Novell NetWare 3.x Client Setup for windows 98 or 95
The instructions below explain how to set up the regular Novell NetWare 3.x
client for use on a Windows 98 or 95 PC.
1. Follow the Windows 95 setup instructions or the Windows 98 setup
instructions.
2. Start up Windows 95 or 98. Click on Start, Settings, then Control Panel.
Double-click on Network. The Network window appears. Click on the
Configuration tab.
3. Make sure that Client for Microsoft Networks and Client for Netware
Networks are listed. If either are missing, you will have to install them
manually. Refer to Manually Installing Network Components in Windows
98 and 95 on page 44.
4. In the Primary Network Logon box, choose Client for NetWare Networks.
5. Under the The following network components are installed box, highlight
Client for NetWare Networks and click on the Properties button.
6. The Client for NetWare Networks Properties window appears. Under the
General tab, enter the name of your network's Preferred Server. Assign the
First Network Drive Letter; the default is F. If available, make sure the
Enable logon script processing is checked. Click OK.
7. Click on the Access Control tab. Make sure the Share-level access control
option is selected; do not select User-level access control.
8. When you're done, click OK to restart your computer.
The NetWare portion of your Windows setup is complete.
39
Advertisement
Table of Contents
