Linksys PAP2-NA User Manual page 18

Phone Adapter with 2 Ports for Voice-over-IP
If you have a non-Linksys router, refer to its documentation for instructions.
If you have a Linksys router, then follow these instructions:
1. On one of your networked computers, open your web browser.
2. Access the Router's Web-based Utility by going to http://192.168.1.1 or the IP address of the Router.
3. A login screen will appear. Leave the User Name field blank. Enter the Router's password (the default
is admin) in the Password field. Then click the OK button.
4. Click the Applications & Gaming tab, and then click the Port Range Forwarding tab.
5. For each port range you must specify, enter a different name in the Application field. Then enter the
number or range of external port(s) used by the Phone Adapter.
6. Select the protocol you will be using, UDP.
7. Enter the IP address of the Phone Adapter. For example, if the Phone Adapter's IP address is
192.168.1.100, you would enter 100 in the field provided.
8. Repeat steps 5-7 until you have entered all four port ranges for the Phone Adapter.
Application Start and End
Internet phone 1 5060 to 5061
Internet phone 2 53 to 53
Internet phone 3 69 to 69
Internet phone 4 10000 to 20000
9. Check the Enable option for the port services you want to use.
10. When you have completed the configuration, click the Save Settings button.
2. When I make a telephone call, the call doesn't go through; instead, I hear a fast busy signal.
Go through this checklist until your problem is solved:
• Pick up your phone and dial 1 + area code + phone number. You must dial 1 and the area code for all
calls, even local ones.
• Follow these instructions to reboot your cable or DSL modem, Phone Adapter, and router:
1. Power off your cable or DSL modem by unplugging its power adapter.
2. Power off the router by unplugging its power adapter.
3. Power off the Phone Adapter by unplugging its power adapter.
Appendix A: Troubleshooting
Common Problems and Solutions
Protocol IP Address
UDP (IP address of
Phone Adapter)
UDP (IP address of
Phone Adapter)
UDP (IP address of
Phone Adapter)
UDP (IP address of
Phone Adapter)
Enable
X
X
X
X
14