Linksys PAP2-NA User Manual page 14

Phone Adapter with 2 Ports for Voice-over-IP
Interactive Voice Response Menu
Action Command
(press these
keys on the
telephone)
Set Static IP Address 111
Check Network Mask 120
(or Subnet Mask)
Set Network Mask (or 121
Subnet Mask)
Check Static Gateway 130
IP Address
Set Static Gateway IP 131
Address
Check MAC Address 140
Check Firmware 150
Version
Chapter 4: Using the Phone Adapter's Interactive Voice Response Menu
Using the Interactive Voice Response Menu
Choices Description
Enter the IP address To set a static IP address, the DHCP
using numbers on the feature must be disabled. If the DHCP
telephone keypad. Use feature is enabled, then you will hear,
the * (star) key when "Invalid Option," if you try to set a
entering a decimal static IP address.
point.
You will hear the current network
mask of the Phone Adapter.
Enter the network To set the network mask, the DHCP
mask using numbers feature must be disabled. If the DHCP
on the telephone feature is enabled, then you will hear,
keypad. Use the * "Invalid Option," if you try to set the
(star) key when network mask.
entering a decimal
point.
You will hear the current gateway IP
address of the Phone Adapter.
Enter the IP address To set a static gateway IP address, the
using numbers on the DHCP feature must be disabled. If the
telephone keypad. Use DHCP feature is enabled, then you will
the * (star) key when hear, "Invalid Option," if you try to set
entering a decimal a static gateway IP address.
point.
You will hear the MAC address of the
Phone Adapter in hexadecimal string
format.
You will hear the version number of
the firmware currently installed on the
Phone Adapter.
10