Table of Contents
Advertisement
ADSL2 Modem with USB and Ethernet
Chapter 4: Installing the USB Driver
Overview
The first time you connect the Modem using a USB connection, you will need to install the USB driver.
Installing the USB Driver
If you are connecting the Modem to your computer using the USB port, then you will need to install the USB driver.
Proceed to the section for your PC's Windows operating system.
Windows XP
1. Power on your computer.
2. Windows XP will automatically detect the ADSL2 Modem. Insert the User Guide and USB Drivers CD-ROM
into your computer's CD-ROM drive.
3. On the first screen of the Found New Hardware Wizard, select Install the software automatically
(Recommended), and click Next.
4. You may see a Windows Digital Signature warning. As this product has been tested to work with Windows,
you may continue.
5. Please wait while Windows XP finds and automatically installs the driver. When Windows XP has finished
installing the driver, the screen will disappear.
Chapter 4: Installing the USB Driver
Overview
Installation is complete.
Figure 4-1: XP Welcome
Figure 4-2: XP Complete
7
Advertisement
Table of Contents
