Connecting A Cigarette Lighter Power Adapter - Honeywell Marathon User Manual

Connecting a Cigarette Lighter Power Adapter

Note: The Honeywell-approved Cigarette Lighter cable is intended for use in 12V DC negative ground
systems only.
To view the instructions when using a cigarette lighter power adapter with a vehicle dock, please see the Marathon Dock
Reference Guide.
1. Plug the lighter end of the cordset into an appropriate 12V DC automotive cigarette lighter receptacle. The LED on the
cigarette lighter Power Adapter illuminates to indicate it is drawing power from the vehicle.
2. Open the port cover on the left side of the Marathon. When the power connector is not used, keep the port cover door
closed.
3. Plug the barrel end
4. The Marathon Battery Status LED at the upper left, next to the display, illuminates orange to indicate the main battery is
recharging by drawing vehicle power through the cigarette lighter adapter.
of the power cable into the Marathon.
3-5