Cleaning The Doors And Side Panels - Miele KFN 14943 SD Operating And Installation Instructions

^ After cleaning, wipe the interior and
accessories with a damp cloth and
dry with a soft cloth.
Leave the door open to air the
appliance for a short while.
^ Remove any soiling with the Original
Miele Care product for stainless
steel.
^ Apply the Original Miele Care
product for stainless steel to stainless
steel panels and frames each time
you clean the appliance.
This will help to protect stainless steel
surfaces and prevent resoiling for a
period of time.
Cleaning the doors and side
panels
Remove any soiling immediately.
If not, it might become impossible to
remove and could cause surfaces to
alter or discolour.
The external surfaces of this
appliance are all susceptible to
scratching.
Contact with unsuitable cleaning
agents can also alter or discolour
the outer surfaces.
Cleaning and care
^ Clean surfaces using a damp
microfibre cloth or with a solution of
warm water and a little washing-up
liquid applied with a soft sponge.
^ After cleaning, wipe the outer
surfaces with a damp cloth and dry
with a soft cloth.
The following also applies to
stainless steel appliances:
– Appliance doors
Appliance doors are treated with a high
quality surface coating. It protects
against soiling and facilitates cleaning
and care.
Do not use the following on the
appliance doors:
– Stainless steel cleaners:
The coating will be damaged.
– Miele Original Care product for
stainless steel:
Visible smearing will form on the
door.
– Side panels
^ Remove any soiling with the Original
Miele Care product for stainless
steel.
^ Apply the Original Miele Care
product for stainless steel to the side
panels each time after cleaning.
Each time this product is used it
forms a protective film against dirt
and water. The stainless steel surface
will be protected against resoiling for
a period of time.
41