Setting The Temperature; Temperature Range - Miele KFN 14943 SD Operating And Installation Instructions

The correct temperature

Setting the temperature

The temperatures in the refrigeration
and freezer sections can be set
separately.
^ Select the refrigeration or freezer
section.
The "Refrigeration" or "Freezer" symbol
lights up yellow.
^ You can now use the arrow sensors
on either side of the temperature
display to set the temperature you
require.
By touching the
X sensor:
the temperature will get
colder
Y sensor:
the temperature will
increase.
The temperature range being set will
flash in the display as you do this.
The following information appears in the
display when the sensors are touched:
– Touching a sensor once: the last
temperature set flashes.
– Each subsequent touch of a sensor:
the temperature is adjusted in 1 °C
steps.
20
– Leaving a finger on the sensor:
changes the temperature
continuously.
When the highest or lowest
temperature in the range is reached,
the X or Y sensor disappears.
Approx. 5 seconds after taking your
finger off a sensor, the average
current temperature of the fridge or
freezer is automatically shown.
When you have adjusted the
temperature, wait for approx. 6 hours
if the appliance is not very full and
for approx. 24 hours if the appliance
is full before checking the temperature
display, as it will take this long for the
appliance to reach the temperature.
Only then will the actual temperature be
set. If, after this time, the temperature is
still too high or too low, you will need to
adjust it again.

Temperature range

The temperature can be adjusted:
– In the refrigerator section from 2 °C
to 11 °C
– In the freezer from -14 °C to -28 °C
The ambient temperature in the room
and the installation location can affect
the time it takes for the appliance to
reach the lowest temperature. If the
ambient temperature is too high, the
appliance may not reach the lowest
temperature.