Arranging The Interior Fittings; Moving The Shelves; Split Shelf - Miele KFN 14943 SD Operating And Installation Instructions

Arranging the interior fittings

Moving the shelves

The shelves can be adjusted according
to the height of the food.
^ Raise the shelf, and pull it forwards
slightly until the notch at the side is in
line with the shelf support. It can then
be raised or lowered to the required
level.
The raised edge at the back must face
upwards to prevent food from touching
the back of the appliance and freezing
to it.
Stoppers prevent the shelves from
being dislodged by mistake.

Split shelf

In order to accommodate tall items in
the appliance, one of the shelves is
divided. The front section can be
pushed under the rear section.
^ Lightly push the rear glass shelf from
underneath.
^ Pull the front half of the glass shelf
forwards slightly and then push it
carefully under the rear half.
30
To move the split shelf:
^ Take both halves of the split glass
shelf out,
^ fit the two brackets onto the supports
on either side at the required height,
^ and push the glass shelves in one
after the other.
The shelf with the raised edge must
be at the back.
Fruit and vegetable drawers on
roller frames
The fruit and vegetable drawers run on
rollers and can be fully pulled out for
loading and unloading. The rollers can
also be removed for cleaning.