Cleaning And Care - Miele KFN 14943 SD Operating And Installation Instructions

Make sure that water cannot get into
the electronic unit or into the lighting.
Do not let water get into the
drainage channel and drain hole
when cleaning.
Do not use a steam cleaning
apparatus to clean the appliance.
Steam could reach the electrical
components and cause a short
circuit.
The data plate located inside the
appliance must not be removed.
It contains information which is
required in the event of a service call.
The stainless steel doors have a
special coating that is not
susceptible to soiling.
Do not apply the Original Miele Care
product for stainless steel to the
doors as visible smearing will occur.
The Original Miele Care product for
stainless steel can, however, be
used on other stainless steel
surfaces on the appliance (available
from Miele or at www.miele.com.au).
This product contains substances
that are gentle to stainless steel
surfaces and, unlike stainless steel
cleaners, it does not contain
polishing agents. Soiling is gently
removed and each time the Original
Miele Care product for stainless
steel is used, it forms a protective
film against dirt and water.

Cleaning and care

To avoid damaging the outer
surfaces of your appliance, do not
use:
– cleaning agents containing soda,
ammonia, acids or chlorides,
– cleaning agents containing
descaling agents,
– abrasive cleaning agents, e.g.
powder cleaners and cream
cleaners,
– solvent-based cleaning agents,
– stainless steel cleaners,
– dishwasher cleaners,
– oven sprays,
– glass cleaning agents,
– hard, abrasive sponges and
brushes, e.g. pot scourers,
– dirt erasers,
– sharp metal scrapers.
Before cleaning
^ Switch off the appliance.
^ Disconnect the appliance from the
mains. Switch off at the wall and
withdraw the plug from the socket, or
disconnect the mains fuse.
^ Take any food out of the appliance
and store it in a cool place.
^ Take out any removable parts, e.g.
shelves, for cleaning.
39