Makita TD0101 Instruction Manual page 7

ACCESSORIES
CAUTION:
These accessories
•
recommended for use with your Makita tool
specified in this manual. The use of any other
accessories or attachments might present a risk of
injury to persons.
attachment for its stated purpose.
If you need any assistance for more details regarding
these accessories, ask your local Makita Service Center.
Screw bits
•
Socket bits
•
Bit piece
•
Adjustable locator with bit
•
Hook
•
Hook
2
009757
The hook is convenient for temporarily hanging the tool.
This can be installed on either side of the tool.
To install the hook, insert it into a groove in the tool
housing on either side and then secure it with a screw.
To remove, loosen the screw and then take it out.
Adjustable locator with bit
•
Adjustable locator with bit
1
2
009835
To use the adjustable locator with bit, remove the
bumper and then install it. The bumper can be removed
by pulling forward.
or attachments
Only use accessory or
1. Screw
2. Hook
3. Groove
3
1
1. Bumper
2. Hammer case
cover
are
7