Casio QT-6600 Service Manual page 88

Prompt message
E048 Insert Slip Paper and
retry.
E049 CHECK memory full.
E050 Detail memory full.
E051 CHK/TBL No. is occupied. Attempt is made to use the <NEW
E052 CHK/TBL No. is Busy.
E053 CHK/TBL No. is not
opened.
E054 Out of CHK/TBL No.
Range.
E056 Store range full.
E057 No item exists in detail.
E058 Enter post entry item.
E059 Press Eat-in or Take-out
key.
**********
E060 Printer offline.
**********
E061 Printer error.
**********
E061 Printer error.
YES : Retry to print.
NO : Show on the screen.
ESC : Discard data.
**********
E062 Printer paper end.
**********
E062 Printer paper end.
YES : Retry to print.
NO : Show on the screen.
ESC : Discard data.
E064 Printer buffer full.
YES : Retry to print.
NO : Show on the screen.
ESC : Discard data.
**********
E070 Terminal out of action.
Cannot print.
**********
E071 Target terminal printer BF
full.
YES : Retry to print.
NO : Show on the screen.
ESC : Discard data.
Meaning
Alarm when no paper is inserted in the
Slip.
Check tracking index full/near end
Check tracking memory full/near end
CHECK> key to open a new check using a
number that is already used for an existing
check tracking memory.
Attempt to use the same check number
whilst the specified number is being used
in the other terminal.
Check number not found
Check number range over
All check number are occupied in range.
Round repeat cannot be found in detail.
Post entry item has not been registered
yet.
Press eat-in or take-out key.
Printer offline.
"****" means ECR logical ID and printer
number.
Printer downed.
"****" means ECR logical ID and printer
number.
Printer downed.
"****" means ECR logical ID and printer
number.
Paper near-end/end "****" means ECR
logical ID and printer number.
Paper near-end/end "****" means ECR
logical ID and printer number.
Print buffer full at sender side
Down at target ECR which has printer
"****" means ECR logical ID and printer
number.
Printer buffer full at target ECR which has
printer
"****" means ECR logical ID and printer
number.
— 85 —
Action
Insert new slip paper.
Finalize and close the check number
currently used.
Finalize and close the check number
currently used.
Finalize and close the check that is
currently under the number that you want
to use or use a different check number.
Use another check number or close the
check at that terminal.
Use the correct check number (if you want
to reopen a check that already exists in
the check tracking memory) or use <NEW
CHECK> to open a new check.
Enter correct number.
Recall the stored data.
Enter Post entry item.
Press Eat-in or Takeout key.
The contents are printed on the backup
printer.
Follow the prompt message.
Set new paper.
The contents are printed on the backup
printer.
Follow the prompt message.
Follow the prompt message.
Follow the prompt message.