Serialport Settings; Serialport Mode; Serialport Baudrate; Serialport Loginrequired - Cisco EX60 Administrator's Manual

Cisco TelePresence System EX Series
Contents

SerialPort settings

SerialPort Mode

Enable/disable the serial port. you will need a console cable made for the purpose. A
description is found on Cisco Support Forum. make a search for "making a Console Cable and
Consoling In".
Requires user role: ADmIn
Value space: <off/on>
Off: Disable the serial port.
On: Enable the serial port.
SerialPort Mode: On
Example:

SerialPort BaudRate

Specify the baud rate (data transmission rate, bits per second) for the serial port. The default
value is 38400.
other connection parameters for the serial port are: Data bits: 8; Parity: none; Stop bits: 1; Flow
control: none.
Requires user role: ADmIn
Value space: <9600/19200/38400/57600/115200>
Range: Select a baud rate from the baud rates listed (bps).
SerialPort BaudRate: 38400
Example:

SerialPort LoginRequired

Determine if login shall be required when connecting to the serial port.
Requires user role: ADmIn
Value space: <off/on>
Off: The user can access the codec via the serial port without any login.
On: Login is required when connecting to the codec via the serial port.
SerialPort LoginRequired: On
Example:
D14726.14 EX Series Administrator Guide TC7.1, APRIL 2014.
Introduction Web interface System settings System settings
www.cisco.com — Copyright © 2010–2014 Cisco Systems, Inc. All rights reserved.
90
Administrator Guide
Setting passwords Appendices