Cisco EX60 Administrator's Manual page 110

Cisco TelePresence System EX Series
Contents
Video Output LCD [2]/[1] Resolution
noTE: EX90 has a LCD 2 connector and EX60 has a LCD 1 connector.
Set the resolution and refresh rate for the video system's LCD screen.
Requires user role: ADmIn
Value space: EX90: <1920_1200_60> EX60: <1920_1080_60>
1920_1200_60: The screen resolution is 1920 x 1200, and the refresh rate is 60 Hz (only
EX90).
1920_1080_60: The screen resolution is 1920 x 1080, and the refresh rate is 60 Hz (only
EX60).
Video Output LCD 1 Resolution: 1920 _ 1080 _ 60
Example:
Video Output LCD [2]/[1] MonitorRole
noTE: EX90 has a LCD 2 connector and EX60 has a LCD 1 connector.
Set the LCD monitor role. Do not change this setting manually; keep the default setting.
Value space: <InternalSetup>
InternalSetup: The internal setup as defined by the Touch controller will be used.
Video Output LCD [2]/[1] Brightness
noTE: EX90 has a LCD 2 connector and EX60 has a LCD 1 connector.
Set the brightness level for the monitor.
Requires user role: ADmIn
Value space: <0..100>
Range: Select a value from 0 to 100.
Video Output LCD 1 Brightness: 50
Example:
Video Output LCD [2]/[1] Red
noTE: EX90 has a LCD 2 connector and EX60 has a LCD 1 connector.
Set the Red color level for the monitor.
Requires user role: ADmIn
Value space: <0..100>
Range: Select a value from 0 to 100.
Video Output LCD 1 Red: 50
Example:
D14726.14 EX Series Administrator Guide TC7.1, APRIL 2014.
Introduction Web interface System settings System settings
Video Output LCD [2]/[1] Green
noTE: EX90 has the LCD 2 connector and EX60 has the LCD 1 connector.
Set the Green color level for the monitor.
Requires user role: ADmIn
Value space: <0..100>
Range: Select a value from 0 to 100.
Video Output LCD 1 Green: 50
Example:
Video Output LCD [2]/[1] Blue
noTE: EX90 has the LCD 2 connector and EX60 has the LCD 1 connector.
Set the Blue color level for the monitor.
Requires user role: ADmIn
Value space: <0..100>
Range: Select a value from 0 to 100.
Video Output LCD 1 Blue: 50
Example:
Video Output Internal [3]/[2] MonitorRole
noTE: EX90 has Internal 3 and EX60 has Internal 2.
Determine the role of the internal monitor and choose where to show the video stream and
presentation. Do not change this setting manually; keep the default setting.
Value space: <First>
First: Show the main video stream and presentation on the internal monitor. For EX90, the
presentation may be shown on a second monitor connected to the HDmI output (see the
Video output HDmI 1 monitorRole setting).
www.cisco.com — Copyright © 2010–2014 Cisco Systems, Inc. All rights reserved.
110
Administrator Guide
Setting passwords Appendices