Test Cam-Usage - Dell S4810 Reference Manual

test cam-usage

Check the Input Policy Map configuration for the CAM usage.
S4810
Syntax
test cam-usage service-policy input policy-map stack-unit
{[number port-set portpipe number] | [all]}
Parameters
policy-map
stack-
unitnumber
port-set
portpipe
number
stack-unit all
Defaults none
Command EXEC
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 7.6.1.0
Version 7.4.1.0
Usage
This feature allows you to determine if the CAM has enough space available before
Information
applying the configuration on an interface.
An input policy map with both Trust and Class-map configuration, the Class-map
rules are ignored and only the Trust rule is programmed in the CAM. In such an
instance, the Estimated CAM output column contains the size of the CAM space
required for the Trust rule and not the Class-map rule.
The following describes the text cam-usage service-policy input
policy-map stack-unit command shown in the following example.
1378
Enter the policy map name.
(OPTIONAL) Enter the keyword stack-unit then the stack-
unit slot number.
Enter the keywords port-set then the stack-unit port pipe
number. The range is from 0 or 1.
(OPTIONAL) Enter the keywords stack-unit all to indicate
all stack-unit.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the C-Series and S-Series.
Introduced on the E-Series.
Quality of Service (QoS)