Rate-Shape - Dell S4810 Reference Manual

Command QOS-POLICY-IN
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Usage The default burst size is 100Kb. If a different value is required, you must configure
Information the burst size to the required value.
Related
rate police
Commands
qos-policy-input

rate-shape

Shape traffic output as part of the designated policy.
S4810
Syntax
rate-shape [kbps] rate [burst-KB]
Parameters
kbps
rate
burst-KB
Defaults Burst size is 10KB. Granularity for rate is Mbps unless you use the kbps option.
Command QOS-POLICY-OUT
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Quality of Service (QoS)
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
— specifies traffic policing on the selected interface.
— creates a QoS output policy.
Enter the keyword kbps to specify the rate limit in Kilobits
per second (Kbps). Make the following value a multiple of 64.
The range is from 0 to 40000000. The default granularity is
Megabits per second (Mbps).
The range is from 10 to 40000.
(OPTIONAL) Enter the burst size in KB. The range is from 0 to
40000. The default is 100.
Introduced on the S6000.
1365