Makita DTM41 Instruction Manual
Cordless multi tool
Hide thumbs
Also See for DTM41:
- Instruction manual (76 pages) ,
- Technical information (12 pages) ,
- Instruction manual (12 pages)
Related Manuals for Makita DTM41
Summary of Contents for Makita DTM41
- Page 1 INSTRUCTION MANUAL Cordless Multi Tool DTM41 DTM51 014551 IMPORTANT: Read Before Using.
-
Page 2: Specifications
EN60745: Be sure that you understand their meaning before use. Read instruction manual. Work mode: Sanding Wear safety glasses. Model DTM41 Sound pressure level (L ) : 76 dB (A) Only for EU countries Ni-MH Uncertainty (K) : 3 dB (A) -
Page 3: Ec Declaration Of Conformity
) : 3.0 m/s For European countries only Uncertainty (K) : 1.5 m/s EC Declaration of Conformity Model DTM41 Makita declares that the following Machine(s): Designation of Machine: Work mode : cutting with plunge cut saw blade Cordless Multi Tool Vibration emission (a ) : 7.0 m/s... -
Page 4: General Power Tool Safety Warnings
Yasushi Fukaya GFCI reduces the risk of electric shock. Director Personal safety Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium 10. Stay alert, watch what you are doing and use common sense when operating a power tool. Do GEA006-2 not use a power tool while you are tired or under General Power Tool Safety the influence of drugs, alcohol or medication. - Page 5 GEB094-2 20. Store idle power tools out of the reach of children and do not allow persons unfamiliar CORDLESS MULTI TOOL with the power tool or these instructions to SAFETY WARNINGS operate the power tool. Power tools are dangerous in the hands of untrained users. This power tool is intended to function for 21.
- Page 6 17. Use of this tool to sand some products, paints WARNING: wood could expose user dust DO NOT let comfort or familiarity with product containing hazardous substances. (gained from repeated use) replace strict adherence appropriate respiratory protection. to safety rules for the subject product. MISUSE or 18.
-
Page 7: Functional Description
Tips for maintaining maximum battery life FUNCTIONAL DESCRIPTION Charge battery cartridge before completely discharged. WARNING: Always stop tool operation and charge the Always be sure that the tool is switched off • battery cartridge when you notice less tool and battery cartridge is removed before power. -
Page 8: Overheat Protection
Battery protection system CAUTION: (Lithium-ion battery with star marking) Before installing the battery cartridge into the tool, • always check to see that the tool is switched off. To start the tool, slide the slide switch toward the "I 1. Star marking (ON)"... -
Page 9: Operation
ASSEMBLY CAUTION: Always be sure that the tool is switched off and the • battery cartridge is removed before carrying out any work on the tool. Installing or removing application tool (optional accessory) 014564 When using sanding application tool, mount the WARNING: application tool on the sanding pad so that it matches Do not install application tool upside down. - Page 10 Dust extraction attachment (optional accessory) 014559 Put the application tool on the workpiece. And then move the tool forward so that the application tool movement does not slow down. NOTE: Forcing or excessive pressure on the tool may • reduce efficiency. Before cutting operation, it is recommended to •...
-
Page 11: Maintenance
Only use accessory or attachment for its stated purpose. If you need any assistance for more details regarding these accessories, ask your local Makita Service Center. Segment saw blade • Round saw blade • Plunge cut saw blade •... - Page 12 Makita Jan-Baptist Vinkstraat 2, 3070, Belgium Makita Corporation Anjo, Aichi, Japan www.makita.com 885329A229...