L-Ess Server Configuration - Cisco ASR 5000 Series Installation And Administration Manual

External
Hide thumbs Also See for ASR 5000 Series:
Table of Contents

Advertisement

▀ L-ESS Server Configuration

L-ESS Server Configuration
This section provides information about the L-ESS configuration file parameters. L-ESS server configuration file,
generic_ess_config, can be modified to fine-tune the operation of the application. This file is located in the
<less_install_dir>/ess/template directory by default.
There are a few parameters that the installation script does not prompt for. These are available in the generic_ess_config
file. The following table lists the L-ESS server configuration parameters and the corresponding descriptions.
Important:
Table 1. L-ESS Server Configuration Parameters
Parameter
ASR 5000 Parameters
essdellocalrecordsexpirytime
essdellocalrecordsstarttime
essbasedirectorypath
Miscellaneous Parameters
logPath
resetfilecontent
▄ Cisco ASR 5000 Series External Storage Server Installation and Administration Guide
70
Any change in the generic_ess_config file requires L-ESS server restart.
Description
This specifies the time period (in days) for which files can
be stored locally in L-ESS.
This specifies the time period (in hours) at which L-ESS
should start deleting local files stored in final directory
depending on the expiry time configured. This value must be
an integer from 0 through 23.
This specifies the L-ESS specific base directory path.
This specifies the directory path where L-ESS stores L-ESS
logs.
If this flag is enabled, L-ESS pull instance on start/restart
empties the file containing the entry of the last xDR file
fetched from the chassis.
The L-ESS assumes that this is a fresh start and will refetch
all the files from chassis if L-ESS is configured not to delete
files from chassis. This parameter is also used to reset the
information maintained for identifying missing files.
If this flag is set, each time when L-ESS instance restarts L-
ESS will also ignore the past information about missing file
identification and the file contents will be reset.
Configuring the L-ESS Server
Default Value
0
0
<less_install_dir>/ess/fetched_data
<less_install_dir>/ess/log
No
OL-22979-03

Advertisement

Table of Contents
loading

Table of Contents