Fax Parameter Table - Panasonic DP-150FP Operating Instructions Manual

Fax Parameters

Fax Parameter Table

No. Parameter
02 RESOLUTION
04 STAMP
05 MEMORY
06 Dialling METHOD
07 HEADER PRINT
08 HEADER FORMAT
10 KEY/BUZZER VOLUME
12 COMM. JOURNAL
13 AUTO JOURNAL PRINT
17 RECEIVE MODE
OP CALL TIMER
18
19 OGM LENGTH (TAM I/F)
Continued on the next page.
PROGRAMMING YOUR MACHINE
Setting
Setting
Number
1 Standard Setting the home position for the RESOLUTION.
2 Fine
3 S-Fine
1 Off Setting the home position of the STAMP key.
To select the stamp function when document is stored in memory,
2 On
see Fax Parameter No. 28.
1 Off Setting the home position for the MEMORY.
2 On
1 Pulse Selecting the Dialling method.
2 Tone
1 Inside Selecting the printing position of the header.
Inside
2 Outside
Outside : Outside TX copy area.
No print : Header is not printed.
3 No print
1 Logo, ID No. Selecting the header format.
2 From To
1 Off Selecting the volume of the Key/Buzzer tone.
2 Soft
3 Loud
1 Off Selecting the home position of printout mode for COMM. Journal
Off/Always/INC.
2 Always Off
Always : Always prints
3 Inc. only Inc. only : Prints only when communication has failed.
1 Invalid Selecting whether the machine prints the journal automatically
after every 40 transactions.
2 Valid
1 Fax Selecting the reception mode. (See page 60)
2 Tel
3 Fax/Tel
4 Fax/TAM
1 Selecting the length of time that your machine signals (rings) for an
20 sec.
incoming voice call in Fax/Tel Auto Switching mode.
2
30 sec.
(See page 62)
3 40 sec.
4 50 sec.
Setting the OGM length of your TAM from 1 to 60 second. Unit will
1 1 sec.
not start to detect SILENT after detecting a call in TAM Interface
mode until the time lapse.
--- ---
(Default = 20 sec.)
60 60 sec.
Comments
: Inside TX copy area.
: Does not print
37