Configuration; Using The Configuration Interface - D-Link DCS-6513 User Manual

Section 3: Configuration

Configuration

Using the Configuration Interface

After completing the Camera Installation Wizard, you are ready to use your camera. The camera's built-in Web configuration
utility is designed to allow you to easily access and configure your DCS-6513. At the end of the Wizard, click Link, or enter the IP
address of your camera into a web browser such as Firefox. To log in, use the User name admin and the password you created in
the Installation Wizard. If you did not create a password, the default password is blank. After entering your password, click OK.
Step 1
Click the Link button on the Wizard. The Setup Wizard will automatically open
your web browser to the IP address of the camera.
Step 2
Enter your login information to access the interface.
2
D-Link DCS-6513 User Manual 30