Setting The Current Time - Hitachi RZ-W2000YH Operating Instructions Manual

Setting the Current Time

●
The internal battery powers the clock to show the time, even when the power plug is unplugged.
●
At room temperature the clock time will show an error of approximately 2 minutes after one month. Use the
following procedure to adjust the current time setting.
4
Ex: To change "19:27" to "20:30"
1
Plug in the power plug.
2
Press or for about 1
second to cause the time display
to flash.
3
Press and to set the
time to "20:30".
●
The time changes each time the button is
pressed.
· changes in increments of 1 hour
and changes in increments of 1 minute.
Continue pressing to speed up the
·
incremental change.
4
Press to light up the time
display.
14
A display when the power plug
is unplugged
2 3
Example for the rice
cooking method
●
The time cannot be
adjusted during cooking,
warming, reheating, or
when the timer is set.
●
The selected rice
cooking method and the
current time are
displayed.
Pressing the "1-2person"
button for 3 seconds while
the current time is flashing
will display "12:00" (12:00
noon) to return the clock to
Beeps and the
its initial setting.
display flashes
●
The clock is a 24-hour
format; for example, 0:00
for 12 a.m. and 12:00 for
12 p.m.
●
If the "CANCEL" button
is not pressed, the time
"Hr" "Min"
setting will automatically
complete about 1 minute
later.
To check the current
time during cooking,
warming or
reheating, or when
the timer is set.
The current time is displayed
for 3 seconds when the
Lights "HOUR" or "MIN" button is
up
pressed and then the clock
returns to the original display.
How to Change the Melody
●
A melody notifies the user of the starting and stopping of cooking.
●
The "Melody (Standard)" is set upon factory shipment.
The sound can be switched to "Melody (Low)" or "Buzzer". Use the following procedure to change the sound.
4 5
3
2
1
Plug in the power plug and set
the inner pot into the rice cooker.
2
Press to make "VARIETY" flash.
●
The flashing display will change each time
the button is pressed.
Flashes
3
Press to make "RISOTTO" flash.
●
The flashing display will change each time
the button is pressed.
Flashes
4
Continue pressing for 5
seconds.
●
The sound changes each time the button is
pressed for 5 seconds.
Melody Melody Buzzer
(Standard) (Low) (Beep)
Makes
the sound
5
Press .
A display when the power plug
is unplugged
Example for the rice
cooking method
●
The selected rice
cooking method and the
current time are
displayed.
Flashes
●
The menu that was
selected last time
flashes and the time that
was set lights up.
Lights
up
Flashes
Flashes
●
The sound that is made
changes.
●
The setting is
remembered until the
next time it is changed.
15