Paper Handling Difficulties - Brother DCP-8250DN Basic User's Manual

Paper handling difficulties

Difficulties
The machine does not feed paper.
The machine does not feed paper
from the MP tray.
The machine does not feed paper
from the MP Tray when using a
large stack of paper.
How do I print on envelopes?
92
Suggestions
If the LCD shows the Paper Jam message and you still have a problem, see Error
and maintenance messages uu page 71.
If there is no paper, load a new stack of paper into the paper tray.
If there is paper in the paper tray, make sure it is straight. If the paper is curled,
you should straighten it. Sometimes it is helpful to remove the paper, turn the stack
over and put it back into the paper tray.
Reduce the amount of paper in the paper tray, and then try again.
Make sure that manual feed mode is not selected in the printer driver.
Clean the paper pick-up rollers.
See Cleaning the paper pick-up rollers uu page 68.
Make sure that MP Tray is selected in the printer driver.
Fan the paper well and put it back in the tray firmly.
Fan the paper well and make sure the paper is under the maximum paper
mark (1). Stagger the pages and put them in the tray until you feel the top page
touch the feed rollers as shown in the illustration.
1
You can load envelopes in the MP tray. Your application must be set up to print
the envelope size you are using. This is usually done in the Page Setup or
Document Setup menu of your application. (See your application's manual for
more information.)