Checking If The Isp Settings Are Ok Or Not - Draytek Vigor2860 Series Quick Start Quide

F o r M a c O S
F o r M a c O S
1. Double click on the current used Mac OS on the desktop.
2. Open the Application folder and get into Utilities.
3. Double click Terminal. The Terminal window will appear.
4. Type ping 192.168.1.1 and press [Enter]. If the link is OK, the line of
"64 bytes from 192.168.1.1: icmp_seq=0 ttl=255 time=xxxx ms" will
appear.
4 . 4 C h e c k i n
4 . 4 C h e c k i n
If WAN connection cannot be up, check if the LEDs (according to the LED
explanations listed on section 1.2) are correct or not. If the LEDs are off,
please:

Change the Physical Type from Auto negotiation to other values (e.g.,
100M full duplex).

Next, change the physical type of modem (e.g., DSL/FTTX(GPON)/Cable
modem) offered by ISP with the same value configured in Vigor router.
Check if the LEDs on Vigor router are on or not.

If not, please install an additional switch for connecting both Vigor router
and the modem offered by ISP. Then, check if the LEDs on Vigor router
are on or not.

If the problem of LEDs cannot be solved by the above measures, please
contact with the nearest reseller, or send an e-mail to DrayTek FAE for
technical support.

Check if the settings offered by ISP are configured well or not.
Vigor2860 Series Quick Start Guide
( T e r m i n a l )
( T e r m i n a l )
g I f t h e I S P
g I f t h e I S P
S e t t i n g s a r e
S e t t i n g s a r e
56
O K o r N o t
O K o r N o t