Makita VC1310L Instruction Manual page 10

Emptying the polyethylene bag
WARNING:
Always make sure that the cleaner is switched off
•
and unplugged before emptying the polyethylene
bag. Failure to do so may cause an electric shock
and serious personal injury.
CAUTION:
Do not apply a great impact on the powder filter and
•
tank. Applying a great impact may cause
deformation and damage to powder filter and tank.
Empty the tank at least once a day although this
•
depends on picked-up dust volume in the tank. Or,
the suction force will weaken and the motor may be
broken.
Do not grab the hook when emptying the tank.
•
Grabbing the hook may cause the hook to break.
011600
Unhook and lift up the tank cover.
011602
Shake off the dust from powder filter, damper and
prefilter and then take the polyethylene bag out of the
tank.
NOTE:
Take the polyethylene bag carefully out of the tank
•
so that the polyethylene bag cannot be caught and
torn by the protrusion inside the tank when
emptying it.
Empty the polyethylene bag before it becomes full.
•
Too much dust in the tank may cause the
polyethylene bag to be torn.
1. Tank cover
1
2. Polyethylene
bag
2 3. Hook
3
Installing powder filter
6
1. Tank cover
2. Powder filter
3. Damper
4. Prefilter
5. Tank
6. Mounting position marking
011637
Place the prefilter in the tank.
Next, mount the damper on the powder filter and then
place it in the prefilter.
When installing powder filter and prefilter, the mounting
position marking on each of them are aligned with that
one at the top of the tank.
Finally, mount the tank cover.
NOTE:
Models VC2510L and VC3210L have no mounting
•
position marking and no need to align it.
Before using the powder filter, make sure that
•
prefilter and damper are always used together. It is
not allowed to install powder filter solely.
Before using the paper pack, make sure that
•
powder filter, damper and prefilter are always used
together.
10
1
2
3
4
5