Honeywell VISTA CADVR-1004C User Manual page 30

ix. Pre-record: Click the inverted triangle, options: None/ 5s/ 10s
x. Trigger PTZ: None/ Cruise line/ Preset point
xi. Attention: Click "Apply" after setup.
Camera block: Alarm when the camera was covered.

CH: DVR channels.

Enable: Place a check mark '√'

Sensitivity: Click the inverted triangle, 3 different level sensitivity: 1,2,3.

Schedule: From Monday to Sunday, 0:00 to 24:00, setup alarm for time periods (time
period cannot cross a day), double click on the time to enter the time period setup.
None: black color (back ground color), Alarm: red color.
Copy: For ease, setup one channel and then copy to the others.

Trigger: The processing for alarming, click "settings" display as below:
30